pilot

NBN to start HFC pilot in November

Kenneth Tsang 1 Comment

Pilot program expected to run until March 2016

The company responsible for building the National Broadband Network, nbn, has released a test agreement to service providers who intend to participate in an end-user HFC pilot which is expected to begin on or around 1st November 2015.  In the document, nbn states that they will use the pilot to “test NBN Co’s delivery of a Layer 2 NEBS to End User premises through the use of HFC technology, which will assist NBN Co to develop a commercial HFC Product.”

Like the current Fibre to the Premises network, nbn will install a Network Termination Device (NTD) at the end user’s premises.  However, this device will only have a single data port for interfacing with the NBN network.  The device will also neglect the voice port (UNI-V) found in the Fibre to the Premises NTD.

The pilot will enable service providers to provide trial services only to their existing HFC, copper phone line or DSL customers within the pilot HFC footprint.

nbn intends to end the pilot by 15 March 2016.  According to the latest Integrated Product Roadmap, nbn expects their HFC product to officially launch in the second quarter of 2016. [HFC Pilot Test Description]

Inside an NBN node at Umina Beach

NBN Co to conduct 200 end-user FTTN trial

Kenneth Tsang Leave a comment

Update 5:03pm: The link to the test agreement was incorrect in the original article. The link has since been updated.

In their second FTTN trial “test agreement” released today, NBN Co reveals that they’ve begun planning for an additional 200-end users to trial and test the Fibre to the Node network. Unlike the FTTN technology pilot which began in the middle of last year at Umina Beach, this trial appears to be user-centric.

iTnews reports that this trial will take place in the Lake Macquarie region.

“iTnews understands the trial will take place in the Lake Macquarie region of NSW.”

Earlier this week at a Senate hearing, Telstra admitted that the earlier FTTN technology pilot run at Umina Beach was to test the FTTN technology and that further trials would be needed to establish the actual experience and speeds that end users can expect at a commercial launch:

“We don’t believe the trial represents real world experience, it was operating over spare copper pairs… In terms of customer experience, we would be of the view there are other trials which we believe may be occurring in the future, that we have to look at.”

Tony Warren

However, based on the test agreement released today, this additional 200 end-user trial will still rely primarily be a “Second Line Pilot” where an unused or new phone line is connected to the end-user premises for the Internet connection. The agreement states that only a “limited number of Single Line Pilot” premises will be nominated by NBN Co, to test the performance of existing phone lines:

“a limited number of Single Line Pilot Premises nominated by NBN Co and agreed to by Test Participant”

It is expected that the FTTN product will be ready for initial product release by the third quarter of this year.

Inside an NBN node at Umina Beach

NBN: Details of FTTN pilot emerge

Kenneth Tsang Leave a comment

Earlier today, NBN Co released the test agreement details for its Fibre to the Node pilot in Umina Beach, NSW and Epping, VIC. After initial delays with negotiation trial access to the copper with Telstra, NBN Co is set to commence the customer trials on or around 1st June 2014.

NBN Co will be conducting main deployment trials, one using a spare copper pair (known as the “Second Line Pilot”) as well as a selected “Single Line Pilot” which will use the existing copper phone line to the home. In a Single Line Pilot, traditional voice services will continue to be delivered from the exchange with the use of a combiner to “inject” VDSL signals into the existing line.

Unlike NBN Co’s FTTN discussion paper as reported by CommsDay, NBN Co will be responsible for a free installation process of both pilots where the new copper pair is terminated a new wall plate for “Second Line Pilot Premises”, or where a splitter is installed for the purposes of a “Single Line Pilot Premises”.

Similar to the FTTB trial, the Retail Service Provider or the end user will provide their own ADSL or NBN Co-approved VDSL modem to connect to the NBN Co FTTN Test Network. During NBN Co’s own shop-front tests in March, it was revealed that a Netcomm NF4V modem router was used.

NBN Co expects these trials to conclude 30th September 2014.